Description
Set of 4 100x24 mm 6 spoke aluminum core replacement skate wheels built with bearings and bearing spacers. Made for 6 mm axle setups (M6 bolts). These fit other brands as well including Swix Triac and Roadline, Ski Skett Shark, Ski Go, One Way, IDT, and Swenor. If you have old Marwe 610's you'll want our 105 mm wheels with 610 conversion spacers. If you have Marwe 620's get these 100 mm wheels with our Marwe 620 conversion spacers. For Marwe 610a (aluminum) these wheels work with the 620 conversion spacers. For Rulla or SnowWing, request our conversion spacers for those brands. If you have Fischer Carbonlites or V2 XL98's you'll want us to use an 8 mm floating bearing spacer, so include a note when ordering to build with the larger spacer.
Wheel Speed Options:
Speed 1 - Faster but far from racing fast (2 ply construction). Shorter wheel life due to protective ply construction.
Speed 2 - Slow: Speed and resistance level comparable to average snow. Most popular speed straight up. Very long lasting.
Speed 3 - Ultra-slow: For strong/elite skiers looking for the most resistance.
Note: If you go with a 1/2 or 2/3 combo, put the speed 2 on the back as they wear best.
Spokes and cores are aluminum. We suggest replacing wheels around 95 mm diameter (after wearing off 5 mm in diameter).
Free shipping in North America.
Note: If you have a rear pull brake, when you change out your wheels, ask us to include new lock washer to use between the outside of the fork and the brake arms.
Weight per one built speed 2 6 spoke wheel with bearings and 6 mm bearing spacer is 202 grams.
Watch this video if you have a different brand of rollerskis and need to figure out if the bearing spacers are 6mm or 8mm: https://youtu.be/UCBOzzhlacM
