4 built 105x24 mm Roller Ski Wheels

Pursuit Rollerskis
Current Stock:
Calculated at Checkout

Wheel speed required

Set of 4 105x24 mm replacement skate wheels built with bearings and bearing spacers, so all you have to do is slide them onto your axle bolts. Made for 6 mm axle setups (M6 bolts). Also work on the Marwe 610's with our conversion spacers for Marwe ($10 for all of them).  

Wheel Speed Options: 

Speed 1 - Faster but far from racing fast (2 ply construction). Shorter wheel life due to protective ply construction. 
Speed 2 - Slow: Speed and resistance level comparable to average snow. Most popular speed straight up. If you are a top 20% go with our 2/3 combo, where you put the speed 2 on back and 3 on front. Very long lasting 1,200+ miles. 
Speed 3 - Ultra-slow: For strong/elite skiers looking for the most resistance. Long lasting.

Note: If you go with a 1/2 or 2/3 combo, put the speed 2 on the back as they wear best.

Note: Depending on the speed the wheels may be 5 or 6 spokes. Spokes and cores are aluminum. If you have 5 spoke wheels, periodically inspect your wheels for cracked spokes. An indicator of a cracked spoke would be a clicking sound while rollerskiing. This can happen in when hitting very large cracks and is dependent on skiers weight and remaining wheel size. We suggest replacing wheels around 95 mm diameter.

Note: If you have a rear pull brake, when you change out your wheels, ask us to include two new lock washers to use between the outside of the forks and the brake arms.