You get four 100x24 mm rubber wheels on alloy hubs with bearings and bearing spacers already pressed in. Choose your speed from 3 dfferent long lasting rubber formulas that we guarantee for one year from defects. These work with other brands as well, saving you money! We've had customers even put these on their V2 100SR rollerskis. If you have Marwe 610's you'll want our 105 mm wheels and our conversion spacers for Marwe found on the Parts page ($10 for all of them). If you are replacing Eplex F1s, buy our unbuilt wheels and swap out your Elpex spacers using a bearing removal tool (on Parts page) as Elpex has a slightly wider bearing spacer and different wheel spacers that you'll want to reuse. One year warranty against defects. We are still selling some 3 spoke and all future production batches will be of the 6 spoke design. Click for more info.

Speed 1 - Faster but far from racing fast. Not a popular speed.
Speed 2 - Slow: Speed and resistance level comparable average snow. Most popular speed straight up and great for 70% of skiers. Reported to be slightly slower or very close to speed of Marwe speed 6 which is what most Marwe 610's have. If you are a top 20% skier go with our 2/3 combo where you put the speed 2 on the back and speed 3 front.
Speed 3 - Ultra-slow: For strong/elite skiers looking for the most resistance. Only a very small % of our customers use speed 3 on front and back to give you an idea of how slow they are.

We have taken our long lasting rubber and put it into a 105 mm version! Marwe 610 owners, along with Pursuit owners, consider this choice for even longer life and smoother ride than our 100 mm wheels. You get four 105x24 mm rubber wheels on alloy hubs with bearings and bearing spacers already inserted. Make sure your rollerski forks are long enough for a 105 mm wheel as many brands don't have clearance space for anything over 100 mm. All our wheels come with a one year warranty against defects.

Will fit Marwe 610's with our wheel conversion spacers for Marwe 610 that we sell on the Parts page. Also fit V2 XL100Rs. Compare to other 105 mm wheels at $180+ for 4 built wheels! Weight of four: 0.98 kg (0.08 kg more than four 100 mm built wheels). They're easy to change!

Speed 1 - Faster but far from racing fast. Not a popular speed.
Speed 2 - Slow: Speed and resistance level comparable average snow. Most popular speed straight up and great for 70% of skiers. Reported to be slightly slower or very close to speed of Marwe speed 6 which is what most Marwe 610's have. If you are a top 20% skier go with our 2/3 combo where you put the speed 2 on the back and speed 3 front.
Speed 3 - Ultra-slow: For strong/elite skiers looking for the most resistance. Note: We have started to ship our new 6 spoke design for some speeds. If you get a mixture of speeds, both will be of the same design, all being either 3 spoke or all our new 6 spoke.

45mm long. You need two 10 mm wrenches for tightening.

Greased and double sealed for more resistance and to keep the elements out. Click for more info.

You get 8 machined wheel spacers measuring 4.6 mm in thickness that allow you to convert your Marwe 610's to hold our 105 mm wheels which have 24.2 mm wide hubs (610 spacers aren't wide enough for our hubs - click on picture above to see comparison photos showing our spacers and wheels fitted on Marwe 610's). Doing the conversion is super easy. You just need two 10 mm wrenches to slide out your axle, then put one of these on each side of the wheel in-between the forks, put the axle back through and you're done, and saved a ton of money! You'll be happy with the longevity of our rubber as well!

This piece goes between the two bearings for a 6 mm axle (need one per wheel).

Black soft plastic fenders that fit both 100 and 105 mm wheels. Price is per fender, and each comes with 2 scews for mounting. Great for going through wet conditions to keep your boots dry from the water spray. Free mounting when purchased with rollerskis. Click for more details.

Includes: 2 frames (T5302 or T6002 model), 4 axles, 4 bearing spacers, and 8 wheel spacers. All you need is bearings and wheels of your choice. If you want to make a custom racing model using inline racing wheels from your garage or Ebay, this is what you need to get started. Most inline skate wheels have the standard size 608 hub (verses the 688 micros) which fit the common size 608 bearings.

Click for more info.

Click for more info.

One (1) black Pursuit T5302 or T6002 frame of your choice. Build your own roller skis! We have spare frames, axles, and spacers to get you started - check out our frame kit also!. Choose 530 or 600 mm wheelbase, drilled for 6mm axles.

One (1) alloy color Pursuit T5304 or T6004 frame of your choice. Build your own roller skis! Works well if you want to build a racing rollerski as you can buy your racing wheels from another site and get the shafts from us. We have spare frames, axles, and spacers to get you started - check out our frame kit also!. Machined in MN. Choose 530 or 600 mm wheelbase, drilled for 6mm axles.

A must have for getting bearings out of wheels. Actual color is red.

This piece goes between the bearing and frame. 2 required per wheel. Used on Pursuit T5302 and T6002.

This piece goes between the bearing and frame. 2 required per wheel. Used on Pursuit T5304, T6004, and T6005. Click for more info.